$42.12
Product Details
Excellent protection against electrical shocks.
Flame- and impact-resistant.
Fully insulated precision-grip handles.
Permanently bonded shank insulation.
Slim-tip to fit-tight blade-bit terminal blocks.
Push-button auto-eject mechanism.
Durable tool pouch for compact storage.
Product Details
Excellent protection against electrical shocks.
Flame- and impact-resistant.
Fully insulated precision-grip handles.
Permanently bonded shank insulation.
Slim-tip to fit-tight blade-bit terminal blocks.
Push-button auto-eject mechanism.
Durable tool pouch for compact storage.
Clearly marked with an official 1,000-volt rating symbol, OEMTOOLS Insulated 10-Piece Interchangeable Bit Screwdriver Set includes eight interchangeable insulated blade bits and two insulated handles. Handles and insulated shanks provide excellent protection against electrical shocks while also delivering flame and impact resistance. Slim-tip to fit-tight terminal blocks ensure the blade-bits remain securely in place when on the job. Push-button auto-eject mechanisms on each precision-grip handle ensures simple and easy blade-bit changes. Store the whole set securely with the included protective roll pouch. This set's perfect for compact storage on your tool belt, in your toolbox or under your work vehicle's front seat. Screwdrivers and Nut Drivers Tool Type: Screwdriver Set; Tip/Socket Type(s): Metric Phillips; Metric Slotted; Tip/Socket Size(s): 3 mm Slotted; 4 mm Slotted, 5.5 mm Slotted; 6.5 mm Slotted; PH1 Phillips; PH2 Phillips; PZ1 Phillips; PZ2 Phillips; Overall Length: 8.25".
(4) Metric Phillips Blade Bits: PH1 x 80 mm, PH2 x 100 mm, PZ1 x 80 mm, PZ2 x 100 mm; (4) Metric Slotted Blade Bits: 3 x 100 mm, 4 x 100 mm, 5.5 x 100 mm, 6.5 x 100 mm; (2) Insulated Driver Handles; (1) Storage Pouch
Manufacturer
MPN
GNS22593
Model#
22593
UPC Code
076812225931
UNSPSC Code
0
Clip Tip
No
Compliance Standards
ASTM F1505; VDE Certified (AC 1,000V)
Global Product Type
Handle Color
Orange
Handle Material(s)
Insulated Rubberized Plastic
Magnetic Tip
Yes
Offset Tip
No
Overall Length
8.25"
Post-Consumer Recycled Content Percent
0%
Pre-Consumer Recycled Content Percent
0%
Shaft/Shank Finish
Orange
Shaft/Shank Length
5"
Shaft/Shank Material
Insulated Rubberized Plastic
Tip/Socket Finish
Black Oxide
Tip/Socket Material
Carbon Steel
Tip/Socket Size(s)
3 mm Slotted; 4 mm Slotted, 5.5 mm Slotted; 6.5 mm Slotted; PH1 Phillips; PH2 Phillips; PZ1 Phillips; PZ2 Phillips
Tip/Socket Type(s)
Metric Phillips; Metric Slotted
Total Recycled Content Percent
0%
Weight
0.95 lb
Package Includes
(4) Metric Phillips Blade Bits: PH1 x 80 mm, PH2 x 100 mm, PZ1 x 80 mm, PZ2 x 100 mm; (4) Metric Slotted Blade Bits: 3 x 100 mm, 4 x 100 mm, 5.5 x 100 mm, 6.5 x 100 mm; (2) Insulated Driver Handles; (1) Storage Pouch
Number of Bits
8
Product Packaging
Tool Pouch
Screwdrivers and Nut Drivers Tool Type
Screwdriver Set
Set Includes
(4) Metric Phillips Blade Bits: PH1 x 80 mm, PH2 x 100 mm, PZ1 x 80 mm, PZ2 x 100 mm; (4) Metric Slotted Blade Bits: 3 x 100 mm, 4 x 100 mm, 5.5 x 100 mm, 6.5 x 100 mm; (2) Insulated Driver Handles; (1) Storage Pouch
Product Biodegradability Indicator
N
Product Compostability Indicator
N
Assembly Required
No assembly is required
Contains Recycled Materials
N
Green Product
N
Returnable
No
Manufacturer Warranty
Y
Unit of Measure
Set
Item Weight
1
Ships via UPS
Y
Carton Pack Quantity
20 Set
Pack Quantity
10 Each
GTIN Item
076812225931
UPC Retail
076812225931
EPA Registration
N
Pesticide Product
N
FDA Certified
N
TSCA 6(h)
N
TSCA 12(b)
N
Brand
OEMTOOLS
Manufacturer Stock No.
22593
Country of Origin
TW
UNSPSC Number
00000000
Warranty
Manufacturer's limited lifetime warranty.
Officecrave.com is a leader in office supplies and business supplies including school supplies, office furniture, technology products and more. Our mission is to provide businesses with the lowest price on the highest-quality items and the OEMTOOLS Insulated 10-Piece Interchangeable Bit Screwdriver Set, Metric Phillips and Slotted Blade Bits, Orange/Yellow Handle (22593) is no exception.
Our customers are from all industries, including schools, government, medical, accounting, corporate, educational, healthcare, finance, military and private industry.
All our products including the OEMTOOLS Insulated 10-Piece Interchangeable Bit Screwdriver Set, Metric Phillips and Slotted Blade Bits, Orange/Yellow Handle (22593) are manufactured under ISO 9001 Quality Standards. We also stock a full line of TAA compliant products. Being green is an important part of our business and we are meeting all Green Compliance Standards.
Welcome back! Please enter your details.
or Login with
Login to your secure OfficeCrave.com account below.
or Login with
Register for an account.
or Register with
Register for an account.
or Register with
List Name (Required)
1 Item added to Saved Items
OEMTOOLS Insulated 10-Piece Interchangeable Bit Screwdriver Set, Metric Phillips and Slotted Blade Bits, Orange/Yellow Handle (22593)
Login To Your Accout
Thank you for your interest in this item.
Please note: Once you receive word that this item is available, it's up to you to act! An email notification guarantees neither inventory nor price. But don't worry: should you miss out on the first shipment, you can always request another notification.
1. Lease. Georgia-Pacific Consumer Products LP ("GP") leases to undersigned ("End User") certain enMotion® dispensers ("Dispensers"). All Dispensers remain GP's property. Lease begins when GP delivers a Dispenser to End User and continues for 5 years, unless terminated as provided herein, and will extend automatically annually thereafter without further charge.
2. Restrictions. End User will only use enMotion® branded refills ("Products") in Dispensers. Use or permitting the use of unauthorized product(s) in a Dispenser is prohibited. End User will only purchase Products from distributors that GP authorizes to sell Products. End User will not (a) in any way alter any Dispenser packaging or labeling; (b) remove or in any way tamper with GP's trademarks on the Dispensers; or (c) affix any other trademark(s), logo(s) or other mark(s) on any Dispensers. GP owns all Dispenser intellectual property rights.
3. Warranty and Repair. Each Dispenser will be free from defects in workmanship and materials under normal use with Products after Dispenser is installed. End User will promptly report to GP via 1-866-HELLOGP: location of the allegedly defective Dispenser, nature of defect, and date of installation. GP disclaims all other warranties with respect to Dispensers, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. If GP determines in good faith that defects in workmanship or material exist in any Dispenser, GP will, in its sole discretion, either repair defects, provide replacement parts or replace Dispenser. Except for this warranty, End User is responsible for all other Dispenser maintenance and repair. GP will not be liable for losses, costs or expenses resulting from (a) End User's or any other third party's improper installation, improper use or abuse of Dispensers, or (b) use of non-authorized products. GP will not be liable to End User for indirect, consequential or incidental damages with respect to this limited warranty and remedy; or for any other damages or remedies beyond those provided in this Lease.
4. Termination; Removal of Dispensers. Either party may terminate this Lease without cause by giving at least thirty (30) days written notice to the other party. Either party may immediately terminate this Lease, upon written notice to the other party if such other party: (a) breaches any provision of this Lease and fails to cure such breach within 10 days of receiving written notice of the breach; (b) ceases to carry on, sells or otherwise transfers substantially all of its business or assets; or (c) makes an assignment for the benefit of creditors. Within 30 days after this Lease terminates (or specific Dispenser leases are terminated), End User will either (a) remove all Dispensers and deliver those Dispensers to a place or places designated by GP in the continental United States, or (b) provide GP a list of the Dispensers and locations where they are installed so that GP may remove them and pick them up. If GP terminates the Lease without cause, then GP will pay the reasonable cost of removing and shipping the Dispensers; otherwise, End User is responsible for all such costs. If End User fails to return the Dispensers to GP (or provide information about their location, as the case may be), then GP or its designees may (on reasonable notice, during normal business hours, and at End User's expense) enter the premises where the Dispensers are located and take the Dispensers into its possession without incurring liability to End User. End User will not be entitled to refund of any fees as a result of termination or recovery of Dispensers.
5. General Provisions. End User may assign its rights and obligations under this Lease without GP's prior written consent to a subsequent purchaser of the facility in which the Dispensers are installed if the assignee is provided notice of the terms of this Lease and agrees to be bound by its terms. This Lease will inure to the benefit of and be binding upon respective successors and authorized assigns of the parties hereto. If any provision of this Lease is deemed unenforceable, invalid or illegal by a court of competent jurisdiction, then the validity of the remaining provisions will not be affected and the rights and obligations of GP and End User will be construed and enforced as if the Lease did not contain the particular provision deemed invalid or illegal. End User will only place the Dispensers in its locations within the United States.
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
At Checkout*Get $5 off your order $99+, limit one use per customer, expires in 14 days