$276.79
Product Details
Tops are made of lightweight HDPE blow molded plastic.
Tops are furnished with two grommet holes for wire management.
Equipped with dual levers, allowing for easy tabletop folding.
Tables nest together for space-saving storage.
Frame and legs are made of Gray hammer-tone powder coated steel and includes a perforated steel modesty panel for an attractive design.
Complete 16-gauge steel.
Tables are equipped with four 2 casters (two locking) making them easy to roll.
Tables are lightweight and are easy to assemble.
Tabletop measures 1.75 thick.
Stock-Up & Save Event
$276.79 $289.54
FREE SHIPPING!
Estimated Delivery Date: 06/06/2026
Product Details
Tops are made of lightweight HDPE blow molded plastic.
Tops are furnished with two grommet holes for wire management.
Equipped with dual levers, allowing for easy tabletop folding.
Tables nest together for space-saving storage.
Frame and legs are made of Gray hammer-tone powder coated steel and includes a perforated steel modesty panel for an attractive design.
Complete 16-gauge steel.
Tables are equipped with four 2 casters (two locking) making them easy to roll.
Tables are lightweight and are easy to assemble.
Tabletop measures 1.75 thick.
Customers Also Purchased
The Flip-N-Store, our blow-molded polyethylene flipper table, is a fantastic addition to any training/conference room or seminar set-up. Its smoothly textured high-density plastic surface flips open and closed with a dual-lever mechanism for amazingly convenient use and storage. Simple to clean and lightweight, the tables also nest together to save space and roll with ease on four 2" casters (two locking). These units feature a reversible modesty panel made of perforated steel with a built-in cable channel as well as removable dual grommet holes for wire management while keeping electronic devices connected and charged. The powder coated frame and legs are made of strong powder-coated steel and boasts a weight capacity of 700 lbs. Affordable and a cinch to assemble, you'll flip for the Flip-N-Store! Top Color: Speckled Gray; Color Family: Gray; Base Color: Gray; Top Shape: Rectangular.
Manufacturer
Categories
MPN
NPSBPFT2460
Model#
BPFT2460
UPC Code
604747024604
UNSPSC Code
0
Base Color
Gray
Base Type
Tubular Steel Legs
Base/Leg Material
Steel
Caster/Glide/Wheel
Four 2" Casters (2 Locking)
Compliance Standards
MAS Certified Green
Edge Detail Profile
Round Edge
Global Product Type
Maximum Weight Capacity
Supports up to 700 lbs evenly distributed
Overall Depth
60"
Overall Width
24"
Post-Consumer Recycled Content Percent
40%
Pre-Consumer Recycled Content Percent
35%
Top Color
Speckled Gray
Top Material
Blow-Molded Polyethylene
Top Shape
Rectangular
Top Thickness
1.75"
Total Recycled Content Percent
75%
Color Family
Gray
Height (Max)
29.5"
Assembly Required
Medium assembly is required
Contains Recycled Materials
Y
Green Product
Y
Returnable
No
Manufacturer Warranty
Y
Unit of Measure
Each
Item Weight
50
Ships via UPS
Y
Carton Pack Quantity
1 Each
This item is sold by the
Each
GTIN Item
604747024604
UPC Retail
604747024604
EPA Registration
N
Pesticide Product
N
FDA Certified
N
TSCA 6(h)
N
TSCA 12(b)
N
Brand
NPS
Manufacturer Stock No.
BPFT2460
Country of Origin
CN
UNSPSC Number
56101519
Warranty
Manufacturer's 10-year warranty.
A: Yes, some assembly is required, but it is designed to be straightforward and user-friendly.
A: The table is designed to support a significant weight, suitable for standard training and conference needs.
A: Warranty details can be obtained from the manufacturer or the retailer where the table is purchased.
A: The table ships in 1-3 business days from the time of order.
A: The table comes in a speckled gray color.
Officecrave.com is a leader in office supplies and business supplies including printer supplies, industrial supplies, janitorial supplies, and more. Our mission is to provide businesses with the lowest price on the highest-quality items and the NPS Flip-N-Store Training Table, Rectangular, 24 x 60 x 29.5, Speckled Gray, Ships in 1-3 Business Days (BPFT2460) is no exception.
We work with customers from all industries, including schools, government, medical, accounting, corporate, educational, healthcare, finance, military and private industry.
All our products including the NPS Flip-N-Store Training Table, Rectangular, 24 x 60 x 29.5, Speckled Gray, Ships in 1-3 Business Days (BPFT2460) are manufactured under ISO 9001 Quality Standards. We also keep a full line of TAA compliant products. Being green is an important part of our business and we are meeting all Green Compliance Standards.
Welcome back! Please enter your details.
or Login with
Login to your secure OfficeCrave.com account below.
or Login with
Register for an account.
or Register with
Register for an account.
or Register with
List Name (Required)
1 Item added to Saved Items
NPS Flip-N-Store Training Table, Rectangular, 24 x 60 x 29.5, Speckled Gray (BPFT2460)
Login To Your Accout
Thank you for your interest in this item.
Please note: Once you receive word that this item is available, it's up to you to act! An email notification guarantees neither inventory nor price. But don't worry: should you miss out on the first shipment, you can always request another notification.
1. Lease. Georgia-Pacific Consumer Products LP ("GP") leases to undersigned ("End User") certain enMotion® dispensers ("Dispensers"). All Dispensers remain GP's property. Lease begins when GP delivers a Dispenser to End User and continues for 5 years, unless terminated as provided herein, and will extend automatically annually thereafter without further charge.
2. Restrictions. End User will only use enMotion® branded refills ("Products") in Dispensers. Use or permitting the use of unauthorized product(s) in a Dispenser is prohibited. End User will only purchase Products from distributors that GP authorizes to sell Products. End User will not (a) in any way alter any Dispenser packaging or labeling; (b) remove or in any way tamper with GP's trademarks on the Dispensers; or (c) affix any other trademark(s), logo(s) or other mark(s) on any Dispensers. GP owns all Dispenser intellectual property rights.
3. Warranty and Repair. Each Dispenser will be free from defects in workmanship and materials under normal use with Products after Dispenser is installed. End User will promptly report to GP via 1-866-HELLOGP: location of the allegedly defective Dispenser, nature of defect, and date of installation. GP disclaims all other warranties with respect to Dispensers, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. If GP determines in good faith that defects in workmanship or material exist in any Dispenser, GP will, in its sole discretion, either repair defects, provide replacement parts or replace Dispenser. Except for this warranty, End User is responsible for all other Dispenser maintenance and repair. GP will not be liable for losses, costs or expenses resulting from (a) End User's or any other third party's improper installation, improper use or abuse of Dispensers, or (b) use of non-authorized products. GP will not be liable to End User for indirect, consequential or incidental damages with respect to this limited warranty and remedy; or for any other damages or remedies beyond those provided in this Lease.
4. Termination; Removal of Dispensers. Either party may terminate this Lease without cause by giving at least thirty (30) days written notice to the other party. Either party may immediately terminate this Lease, upon written notice to the other party if such other party: (a) breaches any provision of this Lease and fails to cure such breach within 10 days of receiving written notice of the breach; (b) ceases to carry on, sells or otherwise transfers substantially all of its business or assets; or (c) makes an assignment for the benefit of creditors. Within 30 days after this Lease terminates (or specific Dispenser leases are terminated), End User will either (a) remove all Dispensers and deliver those Dispensers to a place or places designated by GP in the continental United States, or (b) provide GP a list of the Dispensers and locations where they are installed so that GP may remove them and pick them up. If GP terminates the Lease without cause, then GP will pay the reasonable cost of removing and shipping the Dispensers; otherwise, End User is responsible for all such costs. If End User fails to return the Dispensers to GP (or provide information about their location, as the case may be), then GP or its designees may (on reasonable notice, during normal business hours, and at End User's expense) enter the premises where the Dispensers are located and take the Dispensers into its possession without incurring liability to End User. End User will not be entitled to refund of any fees as a result of termination or recovery of Dispensers.
5. General Provisions. End User may assign its rights and obligations under this Lease without GP's prior written consent to a subsequent purchaser of the facility in which the Dispensers are installed if the assignee is provided notice of the terms of this Lease and agrees to be bound by its terms. This Lease will inure to the benefit of and be binding upon respective successors and authorized assigns of the parties hereto. If any provision of this Lease is deemed unenforceable, invalid or illegal by a court of competent jurisdiction, then the validity of the remaining provisions will not be affected and the rights and obligations of GP and End User will be construed and enforced as if the Lease did not contain the particular provision deemed invalid or illegal. End User will only place the Dispensers in its locations within the United States.
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
At Checkout*Get $5 off your order $99+, limit one use per customer, expires in 14 days