$698.76
Product Details
Built with polyethylene housing that's corrosion- and impact-resistant.
Includes a steel wire fan guard and TEAO motor for OSHA-compliant safe use.
Equipped with three galvanized aluminum blades for long-term performance.
Yoke mount and hardware included for easy installation on walls or columns.
Includes a 12-ft, three-prong power cord to minimize the need for extension cords.
Stock-Up & Save Event
$698.76 $723.76
FREE SHIPPING!
Estimated Delivery Date: 06/06/2026
Product Details
Built with polyethylene housing that's corrosion- and impact-resistant.
Includes a steel wire fan guard and TEAO motor for OSHA-compliant safe use.
Equipped with three galvanized aluminum blades for long-term performance.
Yoke mount and hardware included for easy installation on walls or columns.
Includes a 12-ft, three-prong power cord to minimize the need for extension cords.
Customers Also Purchased
Designed to project large amounts of air long distances, the High Velocity Drum Fan provides fresh air on loading docks, in warehouses, and down assembly lines, or to dry out after a flood and exhaust fumes. It has an efficient single-speed direct-drove TEAO (Totally Enclosed Air Over) motor with three galvanized aluminum fan blades. It comes with a yoke mount connected to a mounting assembly for installation on a wall or column. Fan Head Size: 18"; Fan Type: Industrial; Oscillates: No; Color(s): Blue.
Manufacturer
Categories
MPN
GBE293147
Model#
293147
UPC Code
707022511520
UNSPSC Code
0
AC Voltage
115 V
Air Flow (CFM)
7,700 CFM
Amps
4.9 A/2.6 A
Blade Color
Silver
Blade Material
Galvanized Aluminum
Color(s)
Blue
Cord Length
12 ft
Depth
15.75"
Diameter
18"
Fan Head Size
18"
Fan Type
Industrial
Fan Width
18"
Global Product Type
Industrial Wall Mount Fans
Guard Color
Blue
Guard Material
Powder Coated Steel
Housing Color
Blue
Housing Finish
Polyethylene
Housing Material
Polyethylene
Material(s)
High Impact Polyethylene
Motor Type
Totally Enclosed Air Over (TEAO)
Number of Blades
3
Number of Speeds
1
Post-Consumer Recycled Content Percent
0%
Pre-Consumer Recycled Content Percent
0%
Style
Industrial
Total Recycled Content Percent
0%
Voltage
115 V/208-240 V
Width
25"
Noise Rating (dBA)
73.4 dBA
Horsepower
1/2 hp
Height (Max)
27.2"
Product Biodegradability Indicator
N
Product Compostability Indicator
N
Oscillates
No
Built-In Light
No
Motor Phase
Single
Motor Size
1/8 hp
Switch
Rotary Dial
Fan Speed (RPM)
1,720 RPM
Light Kit Included
No
CFM/Watts
520 W
Maximum Operating Speed (RPM)
1,720 RPM
Assembly Required
Light assembly is required
Contains Recycled Materials
N
Green Product
N
Returnable
No
Manufacturer Warranty
Y
Unit of Measure
Each
Item Weight
91.15
Ships via UPS
Y
Carton Pack Quantity
1 Each
This item is sold by the
Each
GTIN Item
707022511520
UPC Retail
707022511520
EPA Registration
N
Pesticide Product
N
FDA Certified
N
TSCA 6(h)
N
TSCA 12(b)
N
Brand
Global Industrial
Manufacturer Stock No.
293147
Country of Origin
CN
UNSPSC Number
40101604
Warranty
Manufacturer's limited one-year warranty.
Officecrave.com is a national retailer of office supplies including office organization supplies, printers, printer supplies and more. Our goal is to provide businesses with the most affordable price on the highest-quality items and the Global Industrial High Velocity Fan, Wall and Column Mount, 18" (293147) is no exception.
Our customers are from all industries, including schools, government, medical, accounting, corporate, educational, healthcare, finance, military and private industry.
All our products including the Global Industrial High Velocity Fan, Wall and Column Mount, 18" (293147) are manufactured under ISO 9001 Quality Standards. We also keep a full line of TAA compliant products. Being green is an important part of our business and we are meeting all Green Compliance Standards.
Welcome back! Please enter your details.
or Login with
Login to your secure OfficeCrave.com account below.
or Login with
Register for an account.
or Register with
Register for an account.
or Register with
List Name (Required)
1 Item added to Saved Items
Global Industrial High Velocity Fan, Wall and Column Mount, 18" (293147)
Login To Your Accout
Thank you for your interest in this item.
Please note: Once you receive word that this item is available, it's up to you to act! An email notification guarantees neither inventory nor price. But don't worry: should you miss out on the first shipment, you can always request another notification.
1. Lease. Georgia-Pacific Consumer Products LP ("GP") leases to undersigned ("End User") certain enMotion® dispensers ("Dispensers"). All Dispensers remain GP's property. Lease begins when GP delivers a Dispenser to End User and continues for 5 years, unless terminated as provided herein, and will extend automatically annually thereafter without further charge.
2. Restrictions. End User will only use enMotion® branded refills ("Products") in Dispensers. Use or permitting the use of unauthorized product(s) in a Dispenser is prohibited. End User will only purchase Products from distributors that GP authorizes to sell Products. End User will not (a) in any way alter any Dispenser packaging or labeling; (b) remove or in any way tamper with GP's trademarks on the Dispensers; or (c) affix any other trademark(s), logo(s) or other mark(s) on any Dispensers. GP owns all Dispenser intellectual property rights.
3. Warranty and Repair. Each Dispenser will be free from defects in workmanship and materials under normal use with Products after Dispenser is installed. End User will promptly report to GP via 1-866-HELLOGP: location of the allegedly defective Dispenser, nature of defect, and date of installation. GP disclaims all other warranties with respect to Dispensers, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. If GP determines in good faith that defects in workmanship or material exist in any Dispenser, GP will, in its sole discretion, either repair defects, provide replacement parts or replace Dispenser. Except for this warranty, End User is responsible for all other Dispenser maintenance and repair. GP will not be liable for losses, costs or expenses resulting from (a) End User's or any other third party's improper installation, improper use or abuse of Dispensers, or (b) use of non-authorized products. GP will not be liable to End User for indirect, consequential or incidental damages with respect to this limited warranty and remedy; or for any other damages or remedies beyond those provided in this Lease.
4. Termination; Removal of Dispensers. Either party may terminate this Lease without cause by giving at least thirty (30) days written notice to the other party. Either party may immediately terminate this Lease, upon written notice to the other party if such other party: (a) breaches any provision of this Lease and fails to cure such breach within 10 days of receiving written notice of the breach; (b) ceases to carry on, sells or otherwise transfers substantially all of its business or assets; or (c) makes an assignment for the benefit of creditors. Within 30 days after this Lease terminates (or specific Dispenser leases are terminated), End User will either (a) remove all Dispensers and deliver those Dispensers to a place or places designated by GP in the continental United States, or (b) provide GP a list of the Dispensers and locations where they are installed so that GP may remove them and pick them up. If GP terminates the Lease without cause, then GP will pay the reasonable cost of removing and shipping the Dispensers; otherwise, End User is responsible for all such costs. If End User fails to return the Dispensers to GP (or provide information about their location, as the case may be), then GP or its designees may (on reasonable notice, during normal business hours, and at End User's expense) enter the premises where the Dispensers are located and take the Dispensers into its possession without incurring liability to End User. End User will not be entitled to refund of any fees as a result of termination or recovery of Dispensers.
5. General Provisions. End User may assign its rights and obligations under this Lease without GP's prior written consent to a subsequent purchaser of the facility in which the Dispensers are installed if the assignee is provided notice of the terms of this Lease and agrees to be bound by its terms. This Lease will inure to the benefit of and be binding upon respective successors and authorized assigns of the parties hereto. If any provision of this Lease is deemed unenforceable, invalid or illegal by a court of competent jurisdiction, then the validity of the remaining provisions will not be affected and the rights and obligations of GP and End User will be construed and enforced as if the Lease did not contain the particular provision deemed invalid or illegal. End User will only place the Dispensers in its locations within the United States.
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
At Checkout*Get $5 off your order $99+, limit one use per customer, expires in 14 days