Product Details
Water-absorbing polymer crystals are embedded in bandana material and will not ooze or become slimy.
Batting material minimizes uneven expansion of polymer crystals when wet for cooling without the bulk.
Soak in cold water 2 to 5 minutes to activate, no ice or refrigeration needed.
Remains cool for up to four hours to help reduce effects of heat stress.
Tie-back to ensure a close fit to the head, neck or wrists.
Hand wash only and store by hanging in the open air until completely dry.
Temporarily Out of Stock
Product Details
Water-absorbing polymer crystals are embedded in bandana material and will not ooze or become slimy.
Batting material minimizes uneven expansion of polymer crystals when wet for cooling without the bulk.
Soak in cold water 2 to 5 minutes to activate, no ice or refrigeration needed.
Remains cool for up to four hours to help reduce effects of heat stress.
Tie-back to ensure a close fit to the head, neck or wrists.
Hand wash only and store by hanging in the open air until completely dry.
Customers Also Purchased
The Chill-Its 6702 Cooling Bandana is an evaporative cooling headband designed to deliver instant cooling relief lasting up to four hours. This lightweight bandana is designed with polymer crystal technology embedded in a batting material for fast cooling. Embedding the polymer crystals reduces uneven expansion of the polymers when wet (less bulk, more comfort). Use the tie-closure to adjust the fit around the head, neck or wrists. Simply soak the cooling headwear in water for 2 to 5 minutes to activate. The water-absorbing polymer crystals inside will plump up slightly and provide a cooling sensation that lasts for hours. The new woven batting material will not become overly saturated and will not ooze or become slimy. Simply flip the cooling bandana over to refresh the cooling sensation. No ice or refrigeration is needed. Hang dry and rewet to activate. Great for construction, landscaping, roofing, or anybody working in the heat. Apparel Type: Cooling Bandana; Material(s): Cotton; Polymer; Color(s): Black; Color Family: Black.
Manufacturer
MPN
EGO12396
Model#
12396
UPC Code
720476123965
UNSPSC Code
0
Apparel Type
Cooling Bandana
Color(s)
Black
Global Product Type
Material(s)
Cotton; Polymer
Post-Consumer Recycled Content Percent
0%
Pre-Consumer Recycled Content Percent
0%
Size Group
One Size Fits Most
Suggested Use
Cooling
Total Recycled Content Percent
0%
Washable
No
Color Family
Black
Assembly Required
No assembly is required
Contains Recycled Materials
N
Green Product
N
Returnable
No
Unit of Measure
Each
Item Weight
0.05
Ships via UPS
Y
Carton Pack Quantity
1 Each
This item is sold by the
Each
GTIN Item
720476123965
UPC Retail
720476123965
EPA Registration
N
Pesticide Product
N
FDA Certified
N
TSCA 6(h)
N
TSCA 12(b)
N
Brand
Brand Contact
800-225-8238
Manufacturer Stock No.
12396
Country of Origin
ID
UNSPSC Number
46181500
A: The cooling technology works by soaking the bandana in water, which activates the embedded polymers. These polymers then retain the moisture and provide a cooling effect as the water evaporates.
A: Yes, the bandana is effective for cooling in both indoor and outdoor settings, making it versatile for various activities.
A: Yes, the Ergodyne Chill-Its 6702 Cooling Bandana is reusable. Simply re-soak it in water to reactivate the cooling effect.
A: The cooling effect can last for hours depending on the environmental conditions and the level of activity of the user.
A: While designed to fit most adults, it is recommended to assess individual fit and comfort when used by children.
Officecrave.com is a leader in office supplies and business supplies including technology products, maintenance supplies, furniture and more. We always aim to provide businesses with the best price on the highest-quality items and the ergodyne Chill-Its 6702 Cooling Embedded Polymers Tie Bandana, One Size Fits Most, Black, Ships in 1-3 Business Days (12396) is no exception.
Our customers are from all industries, including schools, government, medical, accounting, corporate, educational, healthcare, finance, military and private industry.
Everything you see on OfficeCrave.com including the ergodyne Chill-Its 6702 Cooling Embedded Polymers Tie Bandana, One Size Fits Most, Black, Ships in 1-3 Business Days (12396) are manufactured under ISO 9001 Quality Standards. We also stock a full line of TAA compliant products. Being green is an important part of our business and we are meeting all Green Compliance Standards.
Welcome back! Please enter your details.
or Login with
Login to your secure OfficeCrave.com account below.
or Login with
Register for an account.
or Register with
Register for an account.
or Register with
List Name (Required)
1 Item added to Saved Items
ergodyne Chill-Its 6702 Cooling Embedded Polymers Tie Bandana, One Size Fits Most, Black (12396)
Login To Your Accout
Thank you for your interest in this item.
Please note: Once you receive word that this item is available, it's up to you to act! An email notification guarantees neither inventory nor price. But don't worry: should you miss out on the first shipment, you can always request another notification.
1. Lease. Georgia-Pacific Consumer Products LP ("GP") leases to undersigned ("End User") certain enMotion® dispensers ("Dispensers"). All Dispensers remain GP's property. Lease begins when GP delivers a Dispenser to End User and continues for 5 years, unless terminated as provided herein, and will extend automatically annually thereafter without further charge.
2. Restrictions. End User will only use enMotion® branded refills ("Products") in Dispensers. Use or permitting the use of unauthorized product(s) in a Dispenser is prohibited. End User will only purchase Products from distributors that GP authorizes to sell Products. End User will not (a) in any way alter any Dispenser packaging or labeling; (b) remove or in any way tamper with GP's trademarks on the Dispensers; or (c) affix any other trademark(s), logo(s) or other mark(s) on any Dispensers. GP owns all Dispenser intellectual property rights.
3. Warranty and Repair. Each Dispenser will be free from defects in workmanship and materials under normal use with Products after Dispenser is installed. End User will promptly report to GP via 1-866-HELLOGP: location of the allegedly defective Dispenser, nature of defect, and date of installation. GP disclaims all other warranties with respect to Dispensers, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. If GP determines in good faith that defects in workmanship or material exist in any Dispenser, GP will, in its sole discretion, either repair defects, provide replacement parts or replace Dispenser. Except for this warranty, End User is responsible for all other Dispenser maintenance and repair. GP will not be liable for losses, costs or expenses resulting from (a) End User's or any other third party's improper installation, improper use or abuse of Dispensers, or (b) use of non-authorized products. GP will not be liable to End User for indirect, consequential or incidental damages with respect to this limited warranty and remedy; or for any other damages or remedies beyond those provided in this Lease.
4. Termination; Removal of Dispensers. Either party may terminate this Lease without cause by giving at least thirty (30) days written notice to the other party. Either party may immediately terminate this Lease, upon written notice to the other party if such other party: (a) breaches any provision of this Lease and fails to cure such breach within 10 days of receiving written notice of the breach; (b) ceases to carry on, sells or otherwise transfers substantially all of its business or assets; or (c) makes an assignment for the benefit of creditors. Within 30 days after this Lease terminates (or specific Dispenser leases are terminated), End User will either (a) remove all Dispensers and deliver those Dispensers to a place or places designated by GP in the continental United States, or (b) provide GP a list of the Dispensers and locations where they are installed so that GP may remove them and pick them up. If GP terminates the Lease without cause, then GP will pay the reasonable cost of removing and shipping the Dispensers; otherwise, End User is responsible for all such costs. If End User fails to return the Dispensers to GP (or provide information about their location, as the case may be), then GP or its designees may (on reasonable notice, during normal business hours, and at End User's expense) enter the premises where the Dispensers are located and take the Dispensers into its possession without incurring liability to End User. End User will not be entitled to refund of any fees as a result of termination or recovery of Dispensers.
5. General Provisions. End User may assign its rights and obligations under this Lease without GP's prior written consent to a subsequent purchaser of the facility in which the Dispensers are installed if the assignee is provided notice of the terms of this Lease and agrees to be bound by its terms. This Lease will inure to the benefit of and be binding upon respective successors and authorized assigns of the parties hereto. If any provision of this Lease is deemed unenforceable, invalid or illegal by a court of competent jurisdiction, then the validity of the remaining provisions will not be affected and the rights and obligations of GP and End User will be construed and enforced as if the Lease did not contain the particular provision deemed invalid or illegal. End User will only place the Dispensers in its locations within the United States.
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
At Checkout*Get $5 off your order $99+, limit one use per customer, expires in 14 days