$17.64
Product Details
Proprietary 3M Cool Flow Valve helps keeps wearer cool.
Cushioning nose foam.
Adjustable noseclip helps provide a custom fit and secure seal.
Advanced electrostatically charged microfiber filter.
Two-strap design helps provide a secure fit.
Suggested for grinding, sanding, sweeping, bagging and other dusty operations.
Product Details
Proprietary 3M Cool Flow Valve helps keeps wearer cool.
Cushioning nose foam.
Adjustable noseclip helps provide a custom fit and secure seal.
Advanced electrostatically charged microfiber filter.
Two-strap design helps provide a secure fit.
Suggested for grinding, sanding, sweeping, bagging and other dusty operations.
Lightweight, disposable N95 particulate dust respirator designed to help provide quality, reliable worker respiratory protection. Incorporates 3M's proprietary technology with advanced electrostatically charged microfiber filter media. The proprietary 3M Cool Flow Exhalation Valve reduces heat build-up inside the respirator to help keep the wearer more comfortable. Its adjustable noseclip and cushioning nose foam help provide a custom fit with secure seal and reduces potential for eyewear fogging. These features help promote greater worker acceptance and may help increase wear time. Compatible with a variety of protective eyewear and hearing protection. Two-strap design with stapled dual point attachment helps provide a secure fit. Suggested applications include grinding, sanding, sweeping, bagging and other dusty operations. Can also be used to help reduce inhalation of certain airborne biological particles like mold, Bacillus anthracis, Mycobacterium tuberculosis, etc. but cannot eliminate the risk of contracting infection, illness, or disease. Respirator Type: Half-Face Mask; Rating: N95; Resistance: Non-Oil Based Particulates; Material(s): Advanced Electrostatic Media.
Manufacturer
Categories
MPN
MMM8210V
Model#
8210V
UPC Code
051131497115
UNSPSC Code
0
Adjustability Features
Adjustable Strap; Nose Clip
Compliance Standards
NIOSH Approved
Disclaimer Statement
IMPORTANT: This 3M product must be used in accordance with OSHA regulations, warnings, and limitations that accompany each item.
Filter
Dust; Other Particles
Global Product Type
Material(s)
Advanced Electrostatic Media
Post-Consumer Recycled Content Percent
0%
Pre-Consumer Recycled Content Percent
0%
Rating
N95
Respirator Type
Half-Face Mask
Size
Standard
Total Recycled Content Percent
0%
Valved
Yes
Airborne Contaminant Resistance
Non-Oil Based Particulates
Assembly Required
No assembly is required
Contains Recycled Materials
N
Green Product
N
Returnable
No
Unit of Measure
Box
Item Weight
0.47
Ships via UPS
Y
Carton Pack Quantity
80 Each
Box Pack Quantity
10 Each
This item is sold by the
Box which contains 10 Each
GTIN Item
051131497115
UPC Retail
051131497115
UPC Carton
50051131497110
Brand
Brand Contact
800-328-6276
Manufacturer Stock No.
8210V
Country of Origin
US
UNSPSC Number
46182002
A: No, this mask is designed to filter particles, not odors.
A: The mask comes in a standard size that fits most adult faces.
A: Yes, the 3M 8210V N95 mask is certified by NIOSH.
A: No, the 3M 8210V N95 mask is designed for single-use only.
A: The Cool Flow valve reduces heat and humidity build-up inside the mask for comfort during extended use.
Officecrave.com is a national retailer of office supplies including office organization supplies, printers, printer supplies and more. We strive to provide businesses with the lowest price on the highest-quality items and the 3M Particulate Respirator 8210V, N95, Cool Flow Valve, Standard Size, 10/Box is no exception.
We work with customers from all industries, including schools, government, medical, accounting, corporate, educational, healthcare, finance, military and private industry.
All our products including the 3M Particulate Respirator 8210V, N95, Cool Flow Valve, Standard Size, 10/Box are manufactured under ISO 9001 Quality Standards. We also offer a full line of TAA compliant products. Being green is an important part of our business and we are meeting all Green Compliance Standards.
Welcome back! Please enter your details.
or Login with
Login to your secure OfficeCrave.com account below.
or Login with
Register for an account.
or Register with
Register for an account.
or Register with
List Name (Required)
1 Item added to Saved Items
3M Particulate Respirator 8210V, N95, Cool Flow Valve, Standard Size, 10/Box
Login To Your Accout
Thank you for your interest in this item.
Please note: Once you receive word that this item is available, it's up to you to act! An email notification guarantees neither inventory nor price. But don't worry: should you miss out on the first shipment, you can always request another notification.
1. Lease. Georgia-Pacific Consumer Products LP ("GP") leases to undersigned ("End User") certain enMotion® dispensers ("Dispensers"). All Dispensers remain GP's property. Lease begins when GP delivers a Dispenser to End User and continues for 5 years, unless terminated as provided herein, and will extend automatically annually thereafter without further charge.
2. Restrictions. End User will only use enMotion® branded refills ("Products") in Dispensers. Use or permitting the use of unauthorized product(s) in a Dispenser is prohibited. End User will only purchase Products from distributors that GP authorizes to sell Products. End User will not (a) in any way alter any Dispenser packaging or labeling; (b) remove or in any way tamper with GP's trademarks on the Dispensers; or (c) affix any other trademark(s), logo(s) or other mark(s) on any Dispensers. GP owns all Dispenser intellectual property rights.
3. Warranty and Repair. Each Dispenser will be free from defects in workmanship and materials under normal use with Products after Dispenser is installed. End User will promptly report to GP via 1-866-HELLOGP: location of the allegedly defective Dispenser, nature of defect, and date of installation. GP disclaims all other warranties with respect to Dispensers, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. If GP determines in good faith that defects in workmanship or material exist in any Dispenser, GP will, in its sole discretion, either repair defects, provide replacement parts or replace Dispenser. Except for this warranty, End User is responsible for all other Dispenser maintenance and repair. GP will not be liable for losses, costs or expenses resulting from (a) End User's or any other third party's improper installation, improper use or abuse of Dispensers, or (b) use of non-authorized products. GP will not be liable to End User for indirect, consequential or incidental damages with respect to this limited warranty and remedy; or for any other damages or remedies beyond those provided in this Lease.
4. Termination; Removal of Dispensers. Either party may terminate this Lease without cause by giving at least thirty (30) days written notice to the other party. Either party may immediately terminate this Lease, upon written notice to the other party if such other party: (a) breaches any provision of this Lease and fails to cure such breach within 10 days of receiving written notice of the breach; (b) ceases to carry on, sells or otherwise transfers substantially all of its business or assets; or (c) makes an assignment for the benefit of creditors. Within 30 days after this Lease terminates (or specific Dispenser leases are terminated), End User will either (a) remove all Dispensers and deliver those Dispensers to a place or places designated by GP in the continental United States, or (b) provide GP a list of the Dispensers and locations where they are installed so that GP may remove them and pick them up. If GP terminates the Lease without cause, then GP will pay the reasonable cost of removing and shipping the Dispensers; otherwise, End User is responsible for all such costs. If End User fails to return the Dispensers to GP (or provide information about their location, as the case may be), then GP or its designees may (on reasonable notice, during normal business hours, and at End User's expense) enter the premises where the Dispensers are located and take the Dispensers into its possession without incurring liability to End User. End User will not be entitled to refund of any fees as a result of termination or recovery of Dispensers.
5. General Provisions. End User may assign its rights and obligations under this Lease without GP's prior written consent to a subsequent purchaser of the facility in which the Dispensers are installed if the assignee is provided notice of the terms of this Lease and agrees to be bound by its terms. This Lease will inure to the benefit of and be binding upon respective successors and authorized assigns of the parties hereto. If any provision of this Lease is deemed unenforceable, invalid or illegal by a court of competent jurisdiction, then the validity of the remaining provisions will not be affected and the rights and obligations of GP and End User will be construed and enforced as if the Lease did not contain the particular provision deemed invalid or illegal. End User will only place the Dispensers in its locations within the United States.
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
your order $99+
Sign up for the best discounts and exclusive offers not advertised anywhere else
At Checkout*Get $5 off your order $99+, limit one use per customer, expires in 14 days